Cooper-instruments-systems TT03C Digital Cap Torque Gage Bedienungsanleitung

Series TT03 DIGITAL TORQUE GAUGES User’s Guide

Series TT03 Digital Torque Gauges User’s Guide 9 Either one, two, or none of the set points may be enabled. To toggle between the tension an

Series TT03 Digital Torque Gauges User’s Guide 10 or Click “Install”. 3. The next screen appears as follows: Click “Continue An

Series TT03 Digital Torque Gauges User’s Guide 11 Select “No, not this time”, then click “Next”. 6. The next screen appears as follows:

Series TT03 Digital Torque Gauges User’s Guide 128. The next, and final, screen appears as follows: Click “Finish”. The Mark-10 USB device

Series TT03 Digital Torque Gauges User’s Guide 1310.2 Calibration Procedure 1. Select Calibration from the menu. The display will appear as

Series TT03 Digital Torque Gauges User’s Guide 14 If failed: 5. The following screen appears after the offsets have been calcu

Series TT03 Digital Torque Gauges User’s Guide 15 Remove the torque applied in Step 7, leave the fixtures in place, then press ZERO. 9. Th

Series TT03 Digital Torque Gauges User’s Guide 16 Ensure that the load is not swinging, oscillating, or vibrating in any manner. Then try aga

Series TT03 Digital Torque Gauges User’s Guide 1711.2 Backlight Several initial settings are available upon powering on the gauge. To access

Series TT03 Digital Torque Gauges User’s Guide 18 11.5 Initial Mode This section is used to configure the initial mode upon powering on the

Series TT03 Digital Torque Gauges User’s Guide 1Thank you… Thank you for purchasing a Mark-10 Series TT03 digital torque gauge, designed fo

Series TT03 Digital Torque Gauges User’s Guide 1912.2 Factory Settings Parameter Setting Set points Upper Disabled (defaults to 80% o

Series TT03 Digital Torque Gauges User’s Guide 20NOTES:

Series TT03 Digital Torque Gauges User’s Guide 21 Mark-10 Corporation has be

Series TT03 Digital Torque Gauges User’s Guide 21 OVERVIEW 1.1 List of included items Qty. Part No. Description 1 12-1049 Carrying Cas

Series TT03 Digital Torque Gauges User’s Guide 32 POWER The TT03 is powered either by an 8.4V NiMH rechargeable battery or by an AC adapte

Series TT03 Digital Torque Gauges User’s Guide 43 MECHANICAL SETUP Fig. 3.1 Proper axial loading of Series TT03 torque

Series TT03 Digital Torque Gauges User’s Guide 54 HOME SCREEN AND CONTROLS 4.1 Home Screen No. Name Description 1 M

Series TT03 Digital Torque Gauges User’s Guide 68 High / low limit indicators Correspond to the programmed set points. Indicator definitions

Series TT03 Digital Torque Gauges User’s Guide 74.3 Menu navigation basics Most of the gauge’s various functions and parameters are configure

Series TT03 Digital Torque Gauges User’s Guide 86 CHANGING THE UNITS The TT03 can display three different measurement units, depending on